A column type powder mixer, in short, is a column type mixing tank. The advantage is that it occupies a small area, has a simple structure, has a relatively light net weight, does not produce much noise, is affordable, and is easy to maintain. In the middle and later stages, if there is damage to spare parts, they must be disassembled and replaced. The replacement process is very simple and does not require high technological content. The mixing uniformity can reach around 70-80%. Can consider customers with less uniform mixing. Mixing materials are also common, such as general pellet feed, wheat flour, interior wall putty powder, dry mortar dryer, recycled plastics, etc.

And the drawbacks are self-evident. His principle is to lift the machine equipment vertically in a spiral manner from the bottom, and then drop it down from the top to circulate the system for mixing. With a mixing degree of 70-80%, it is necessary to have a higher degree of uniformity and increase the mixing time. However, some materials with large proportion differences and long mixing time may be mixed and separated, which cannot achieve the expected actual effect. The second disadvantage is that it has a large capacity, which means it only takes one meal. It's not that we can't reach a larger space, it's just that the cost of sending it out is a bit unacceptable.